Setting Up Your Food Processor; Attaching The Work Bowl - KitchenAid 5KFP1335 Manual

SETTING UP YOUR FOOD PROCESSOR

Attaching the work bowl

NOTE: Select the accessory you would like to use and install it according to the
instructions on the following pages.
1
Place the Food Processor on a dry, level
countertop with the controls facing
forward. Do not plug in the Food
Processor until it is completely assembled.
3
Grasp the work bowl handle and
turn the bowl counterclockwise
to lock it on the base.
2
Place the work bowl on the base,
aligning the raised portion with the
indentation on the base. The center
hole should fit over the power shaft.
Power Shaft
15