Silvercrest SMPS 7 D2 Operating Instructions Manual page 36

1) Find a well-lit place to work. There must be a mains power outlet
in close proximity.
2) Insert the appropriate attachment for your purpose in the attachment
fitting . The attachment must sit securely.
3) Attach the connector plug
connector socket
4) Plug the mains adapter
5) Always start the treatment at slow speed and only increase it
when necessary. Press the
If you want to reduce the speed, press the
6) Slide the on/off/direction switch
The selected direction of rotation is shown by the coloured LED
direction indicator
–
Green LED = anti-clockwise
–
Red LED = clockwise
7) The appliance operates at the slowest speed.
NOTE
► Always select the direction of rotation for treating the nails in
their direction of growth. If possible, treat the nails from the
outside towards the inside (to the nail tip). Otherwise, the nails
will split more easily.
► If you feel that the nails could crack during treatment, select
the other direction.
8) You can now start working.
SMPS 7 D2
9
of the mains adapter
6
of the hand element
8
into a mains power outlet.
button
4
as follows:
7
.
2
to increase the speed.
button
5
in the desired direction.
GB │ IE
8
to the
3
.
│
33 ■