Cleaning Ice Chute - Coca-Cola Freestyle 9OOO User Manual

maintenance

cleaning ice chute

How to properly clean the ice chute
Turn off power to the dispenser.
Remove the lower chute by carefully pulling on the front lip of the
power chute. It should disengage and pull forward.
Remove the upper chute by carefully pulling on the upper lip of the
upper chute. It should disengage and pull forward.
Wash the upper and lower chute and ice chute body area with
approved sanitizing solution (Kay-5).
Soak upper and lower chutes in Kay 5 sanitizing solution for 2 minutes.
Use a clean, sanitized towel or cloth to wipe the ice chute body area.
Reinstall the upper ice chute by pushing up and into the ice chute body
until a click sound is made. When reinstalling the upper ice chute,
ensure the arrow on outside of ice chute is pointing toward the
dispenser and ice opening.
Reinstall the lower ice chute by pushing up and into the bottom of the
upper ice chute until a click sound is made.
Turn on power to the dispenser, allowing a few minutes for dispenser to
complete standard start-up procedure. Then test to ensure the
dispenser is operating properly, i. e., dispense a small amount of ice
into a cup.
© 2020 The Coca-Cola Company | Coca-Cola Freestyle® 9000 User Guide | Confidential information of The Coca-Cola Company | v1.200401 |
15