Table of Contents
Advertisement
product replacement
managing ingredient cartridges and trays
SmartPAK™ (paperboard) cartridges are lightweight,
recyclable, and designed to optimize backroom
storage space.
Inventory & Quick Replacements:
• Be prepared during rush periods! Place fast moving ingredient cartridges
in extra trays and stage near dispenser for fast change outs.
• Use your oldest ingredient cartridges on hand first, i.e.
"FIRST-IN ~ FIRST-OUT."
• Always ensure ingredient cartridges are
organized by "enjoy by dates" to effectively
dishwasher may warp the trays over time.
8
|
© 2020 The Coca-Cola Company | Coca-Cola Freestyle® 9000 User Guide | Confidential information of The Coca-Cola Company | v1.200401
manage inventory.
Storage Conditions:
• Avoid placing cartridges and plastic
trays near any heat source, standing
water, or cleaning solutions.
Cleaning Trays:
• Black plastic cartridge trays should
be 'hand washed' only. Use detergent
cleanser, followed by Kay 5 sanitizer
or approved equivalent and allow to
air dry. NEVER PLACE IN A
DISHWASHER. Placing trays in a
NEW
Push & Click Ingredient Trays
Some outlets will convert to an updated Push & Click ingredient tray.
To install these new trays follow the instructions below:
Prior to installation, hand wash trays using only detergent cleanser
and Kay-5 sanitizer or an approved equivalent.
Replace each cartridge one at a time. This is crucial to ensure
ingredient cartridges remain in the proper slot.
Open the cartridge door and remove the cartridge tray.
If you're installing a Push & Click Tray, remove the cartridge door
and thoroughly clean the cartridge slot and probe (see page 7).
Remove the ingredient cartridge from the existing tray and swap
into the new Push & Click tray. Then, insert the cartridge into the
slot and push until you hear the white latch click into place.
Once you install the new ingredient trays, close the dispenser door.
On the Dashboard screen, select "Prime All."
Traditional Trays
Push & Click Trays
Advertisement
Table of Contents
