Advertisement
ROUGHING-IN DIMENSIONS
6"
2-7/8"
14
SPOUT/HANDSPRAY INSTALLATION
Thread nut and washer to bottom of shank. Insert shank
from bottom of sink and slide on the gasket. Thread
escutcheon onto shank so 3/8" of shank thread is
showing over the top of the escutcheon. Thread the
spout fully onto shank until it stops. Thread escutcheon up
until it stops.
Tighten nut and washer to secure shank to sink.
Apply plumbers putty or other sealant to underside of
spray holder according to the putty manufacturer's
instruction. Then place through sink. From under sink,
securely hand-tighten nut. Insert handspray hose through
spray holder and attach hose to shank tee.
AA
106965-2-
(B)
9-1/2"
2" D.
1-1/4" D.
7-1/4"
2-1/8" D.
1-3/8"
1-1/4" D.
MAX.
4"
4"
Shank
3/8"
Escutcheon
Spout
Escutcheon
Gasket
Sink
Washer
Nut
Handspray
Hose
2
1-7/8" D.
1-1/4"
1" D.
MAX.
Handspray
Spray
Holder
Plumbers
Putty
Nut
Shank
Shank
Tee
Kohler Co., Kohler, WI
Advertisement
