Table of Contents
Advertisement
E:\Works\5003283211\5003283211DSXB700WUC\01GB-DSX-B700Wxx\030CD.fm
010COV.book Page 40 Monday, February 4, 2019 2:03 PM
Using the wired remote control
When using the steering wheel remote
control
Installation of the connection cable RC-SR1 (not
supplied) is required before use.
1
To enable the steering wheel remote control, select
[STEERING] [EDIT CUSTOM] to make the
registration (page 20).
When the registration completes, the steering wheel
remote control becomes available.
Notes on installing the connection cable RC-SR1 (not
supplied)
Refer to the support sites on the back cover for
details, then connect each lead properly to the
appropriate leads. Making an improper connection
may damage the unit.
Depending on the type of car, be sure to insulate the
unused leads with electrical tape for safety.
Do not connect this cable when the steering wheel
remote control is not used.
Consulting the dealer or an experienced technician
for help is recommended.
When using the wired remote control
1
To enable the wired remote control, set [STR
CONTROL] in [STEERING] to [PRESET] (page 20).
Installation
Removing the bracket (Europe models
only)
Before installing the unit, remove the bracket
from the unit.
1
Insert both release keys until they
click, and pull down the bracket , then
pull up the unit to separate.
Face the hook inwards.
40
GB
Mounting the unit in the dashboard
For Japanese cars, see "Mounting the unit in a
Japanese car" (page 41).
Mounting the unit with an installation kit
(not supplied) (except for Europe models)
You can use a commercially available double DIN
installation kit. Choose an installation kit with the
following panel frame size.
Larger than 172 mm × 97 mm (6
h), with an inner corner radius of less than 0.5 mm
(
1
/
in).
32
Note
Be sure to use the mounting screws .
To dashboard/center console
Larger than
97 mm (3
7
/
in)
8
Larger than
172 mm (6
7
/
in)
8
Installation kit (not supplied)
Mounting the unit with the supplied
bracket (Europe models only)
Before installing, make sure the catches on both
sides of the bracket are bent inwards 3.5 mm
(
5
/
in).
32
1
Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
Catch
Larger than
111 mm
(4
3
/
8
masterpage: Left
7
/
in × 3
7
/
in) (w/
8
8
Larger than
182 mm (7
1
/
in)
4
in)
DSX-B700W/DSX-B700
5-003-283-00(1)
- Quick Links:
- Guide to Parts and Controls
Hide quick links:
Advertisement
Table of Contents
