Advertisement
Cost Effective Paging Horns and Speakers for 70V Paging Systems
In outdoor, factory or warehouse environments, 25AE-70V paging horns are the best
method of producing understandable sound. In these environments the directional design
allows the installer to focus the sound cone down aisles and toward work areas.
The 25AE-70V paging horn provides a built-in step-down transformer for use with 25V
or 70V paging systems such as Viking models PA-30, PA-60, PA-250, PA-250-IP and
PP-250. The transformer has a range of 5 separate switch selectable power taps, which
can be used to adjust the volume of each speaker. These higher voltage distributed audio
paging systems also have the advantage of being able to connect more speakers using
lighter gauge wire runs while having less volume lost in wire resistance. This saves wiring
costs compared to 8 Ohm systems. etc. For more info, see DOD 471.
Model 30AE-70V
High Power Weather Resistant Paging Horn for Use with 8 Ohm or 25V / 70V Systems
The 300AE paging horn provides a built-in step-down transformer for use with 25V
or 70V paging systems such as Viking models PA-30, PA-60, PP-250, PA-250,
PA-250-IP. The transformer has a range of power taps that are selectable with a 6
position rotary switch, so that installers are able to independently adjust the volume
of each paging horn. These higher voltage paging systems also have the advantage
of being able to connect more speakers using lighter gauge wire runs and still have
less volume lost in wire resistance.
The 300AE weather resistant design allows for use in outdoor, factory, or warehouse
environments. Its larger size and greater frequency response provide greater
intelligibility of voice pages and is suitable for background music. The directional
design allows the installer to focus the sound cone down aisles and toward work
areas. The included mounting hardware provides full adjustment of horizontal and
vertical positioning. For more info, see DOD 497.
Tile Bridge for Ceiling Speakers
Model
SA-TBA
Related Products
In office and restaurant environments, it is best to distribute sound more evenly. Ceiling
mounted 30AE-70V speakers in close proximity offer the best distribution and are cost
effective.
The 30AE-70V ceiling speaker provides a built-in step-down transformer for use with 25V
or 70V paging systems such as Viking models PA-30, PA-60, PA-250, PA-250-IP and PP-
250. The transformer has a range of 5 separate power taps, which can be used to adjust
the volume of each speaker. These higher voltage distributed audio paging systems also
have the advantage of being able to connect more speakers using lighter gauge wire runs
while having less volume lost in wire resistance. This saves wiring costs compared to 8
Ohm systems. For more info, see DOD 473.
The SA-TBA is a tile bridge designed to mount 8 inch loud
speaker and bridges both 2 ft x 2 ft and 2 ft x 4 ft ceiling tiles.
It is compatible with the Viking models SA-1S, 30AE, 35AE,
and 40AE speakers. The SA-TBA tile bridge is constructed
of 24 gauge cold rolled steel with an electro galvanized rust-
resistant finish. For more info, see DOD 534.
4
Model
25AE-70V
Model
300AE
Advertisement
