Locking Gunwale Bars Into Position; Insert #3 Crossrib First - Feathercraft K2 Expedition Double Manual

Aluminum Tab
14

LOCKING GUNWALE BARS INTO POSITION.

a) Reach through bow cockpit and interlock ends of
gunwale. Push out towards skin.
b) Twist aluminum tab on gunwale section to lock
into place. Do this on both sides.
15

INSERT #3 CROSSRIB FIRST.

• Lay crossrib horizontally between the gunwale frame-work.
• Push frame out and twist crossrib down into position.
• Repeat with crossribs #2 and #5.
• With crossrib #4, attach bottom thumbscrew then pull
gunwale bars in to meet the crossrib and insert side pins to
the frame.
Feathercraft
K2 Expedition Double
15