Table of Contents
Advertisement
7. Power Jack
The input power is 12VDC.
To ensure maximum compatibility, use only the power adapter that
came with your product. Otherwise, the product may be damaged.
Note
8. MIC in (audio in)
Connect a microphone to the network camera.
9. Line out (audio out)
Connect a loud speaker to the network camera. This is for voice alert and two-way
audio.
2.6.3 Installation
1. Fix IR camera in a desired location with stand.
2. Plug in Ethernet Cable into RJ-45 connector (LAN port).
3. Connect the attached power adapter to camera and plug in this adapter into power
outlet.
4. Connect Video BNC connector to a TV set if necessary (to check camera viewing
angle and focus).
5. Done.
DC 12V / 1A
I/O Terminal
Video Output
Microphone Input (Pink)
Line Out (Green)
Network
19
Advertisement
Table of Contents
