Klein Tools CL390 Instruction Manual page 12

ENGLISH
CONTINUITY
1. Insert RED test lead into VΩµA jack
into COM jack
Continuity/Resistance/Capacitance/Diode-Test
NOTE: The meter defaults to Continuity testing in this mode. Ensure
that the Continuity Testing icon
press the "SEL/NCV" button
shown.
2. Remove power from circuit.
3. Test for continuity by connecting conductor or circuit with test
leads. If resistance is measured less than 10Ω, an audible signal
will sound and display will show a resistance value indicating
continuity. If circuit is open display will show "OL".
Black lead
DO NOT attempt to measure continuity on a live circuit.
12
OPERATING INSTRUCTIONS
, and rotate function selector switch
4
repeatedly until the
12
Red lead
, and BLACK test lead
5
is visible on the display. If not,
to the
2
setting.
icon is