Lubrication; Storing - Westfalia 80 31 50 Instruction Manual

Lubrication

The air sand blaster requires clean and oil-free air. So do not use an oil-fog
lubricator within the air supply system.
If possible, only use compressed air hoses for the air supply that previously
have not been used with other air tools which required an oil-fog lubrication
system.
Lubricate the moving parts of the trigger mechanism from time to time. To do
so, turn the screw on the top of the sand blaster counter clockwise to release
it. Remove the parts of the spring mechanism and clean them, if necessary.
Then add a few drops of oil to those parts and re-assemble them in reverse
order.

Storing

Store all parts of the set in a dry location that is protected from dust and dirt.
Using
11