Main Burner Flame Pattern; Main Burner Cleaning Procedure - Weber 77576 Owner's Manual

Lp gas grill
Hide thumbs Also See for 77576:
Table of Contents

Advertisement

Available languages

Available languages

MAIN BURNER FLAME PATTERN

®
The Weber
gas barbecue burners have been factory set for the correct air and gas
mixture. The correct fl ame pattern is shown.
1)
Burner tube
2)
Tips occasionally fl icker yellow
3)
Light blue
4)
Dark blue
If the fl ames do not appear to be uniform throughout the burner tube, follow the burner
cleaning procedures.

MAIN BURNER CLEANING PROCEDURE

Turn off the gas supply. Remove burners fi rst (See section - Replacing Main Burners).
Look inside each burner with a fl ashlight.
Clean the inside of the burners with a wire (a straightened-out coat hanger will work).
Check and clean the air shutter opening at the ends of the burners. Check and clean
the valve orifi ces at the base of the burner orifi ce (5). Use a Steel bristle brush to clean
outside of burners. This is to make sure all the burner ports are fully open.
CAUTION: Do not enlarge the burner ports when cleaning.
Maintenance
1
23
2
3
4
(5)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q 300Q 300 77576

Table of Contents