Package Contents; Disposal Of The Packaging - Silvercrest SSM 350 A1 Operating Instructions Manual

Package contents

The appliance is supplied with the following components as standard:
▯ Hand blender
▯ Operating instructions
1) Remove all parts of the appliance and the operating instructions from the box.
2) Remove all packaging material.
3) Clean all parts of the appliance as described in the section "Cleaning".
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defec-
tive packaging or during transport, contact the Service hotline (see section
Service).

Disposal of the packaging

The packaging protects the appliance from damage during transport. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
NOTE
► If possible, keep the original packaging during the warranty period so
that the appliance can be properly packed for returning in the event of a
warranty claim.
SSM 350 A1 GB │ IE │ NI │ CY │ 3 ■