Weber SKYLINE 520 Owner's Manual page 29

d) Unlatch the Spider Stopper Guards and remove.
Figure 14.
Figure 14
e) Remove the manifold bracket and unscrew the two
wing nuts that hold the manifold to the cooking box.
Pull the manifold and valve assembly out of the
burners and carefully set it down. Figure 15.
Figure 15
f) Slide the burner assembly out from under the guide
screw and washer in the corners of the cooking box.
Figure 16.
Guide screw
Figure 16
g) Lift and twist the burner assembly slightly, to separate
h) To reinstall the burners, reverse steps c) through g).
properly over the valve orifices. Figure 18a.
Check proper assembly before fastening manifold in
place. Figure 18b.
View from behind
cooking box
Wing nuts
29
the crossover tube from the burners. Figure 17.
Remove the burners from the cooking box.
Crossover tube
Figure 17
CAUTION: The burner openings must be positioned
(a)
Valve
Burner
(b)
Figure 18