Table of Contents
Advertisement
Communicating with the Reader
5.3 Connecting to PC via Bluetooth
5.3.1 Bluetooth Operation
By default, the Bluetooth module is discoverable and connectable (Slave mode or device).
Bluetooth authentication is enabled. When enabled, Bluetooth uses SSP (Secured Simple
Pairing) to pair with another remote device. The pairing will be done transparently for the user.
Note: When Bluetooth authentication is disabled, the default PIN code is 1234. This may be
required with older Bluetooth
If the reader must connect by itself to a remote device, the menu allows to search for the devices
in the vicinity and pair to the desired device. Once a device is selected, the reader will operate
as Master and will constantly try to connect to the associated device. In the Master mode, the
reader is NOT connectable.
Note: The Connection to an iPhone or an iPad requires the Master mode.
The reader keeps in memory the last 4 devices it connected to for easy re-connection.
5.3.2 Bluetooth Indicators
The table below explains the meaning of the Bluetooth symbol seen on the HPR Lite's top bar of
the screen.
Icon
Blinking
Fixed
Blinking
Fixed
Note: When the Bluetooth module is disabled, the Bluetooth icon is not displayed.
HPR Lite Reader User Manual
devices.
Select device
}Slave
MZ220
XR3000
My iPhone
Search new device...
Disconnected
(Visible and connectable, Slave mode)
Connected
(Slave mode)
Disconnected, tries to initiate connection with the
selected device
(Master mode)
Connected
(Master mode)
State
20
Advertisement
Table of Contents
