Memory Settings - Biomark HPR LITE READER User Manual

Configuring Reader

3.2 Memory Settings

Pressing the (Right) key while in the Main Menu Screen will display the Memory settings
menu.
This menu allows you to access information within the reader's memory.
Parameters that can be adjusted are:
View tags - Displays the tag IDs currently stored in the reader's memory from newest to
•
oldest. The numbers in the parenthesis tell you which tag ID you are currently viewing out
of the total number of tag IDs stored.
Storage mode - Changes which detected tag IDs are stored in the memory. There are 3
•
possible options:
o Disabled - Disables the HPR Lite's memory. Detected tag IDs will not be stored in
the memory but will still be transmitted via USB and Bluetooth connections. When
disabled, the counter on the main screen is replaced with an 'OFF' indication.
o On All - All detected tag IDs will be stored in the memory and transmitted via USB
and Bluetooth connections. The memory counter on the main screen will increase
after each detection.
o On Unique - A tag ID is stored and transmitted via USB and Bluetooth connections
only once when it is detected several times in a row. If another tag is detected after
the first tag, and the first tag is detected again, it will be read and stored again. If
the reader is powered off and on, the tag ID can be stored and transmitted again.
On Unique is the default Memory setting. See examples on the following page.
HPR Lite Reader User Manual
3:13 PM
07/21/2020
3DD.00075BCD15
FDX-B
MEMORY
OFF
3:13 PM
07/21/2020
3DD.00075BCD15
FDX-B
MEMORY
01234
12