Fermax 6030 Manual page 23

Kit VIDEO DIGITAL
Kit VIDEO DIGITAL
OUTDOOR PANEL INSTALLATION
Follow the recommendations shown in this chapter to install the Outdoor
Panel correctly. Do not forget to remove the protective plastic film from the front
of the camera once the installation is complete.
Before embedding the box, break the flange
where the cables will be passed through.
Fit the cellular damp-proof rubber strips
supplied.
Raise the button tab and put the label in
place. You may use the labels supplied
with the Panel.
Place the embedding box at the desired
height .
Use the hinges to fasten the cables and
handle the panel easily (with embedding
box).
Close the Panel and tighten the screws
firmly with the Allen key provided. Fit the
studs included with the Kit.
1.7m
Pag 23