Table of Contents
Advertisement
Network Bullet Camera·Quick Start Guide
2 Installation
Before you start:
● Make sure the device in the package is in good condition and all
the assembly parts are included.
● The standard power supply is 5 VDC. Please make sure your
power supply matches with your camera.
● Make sure all the related equipment is power-off during the
installation.
● Check the specification of the products for the installation
environment.
● Make sure that the wall is strong enough to withstand four
times the weight of the camera and the bracket.
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
● This device series shares similar structure. This manual takes
one of them for installation demonstration.
● Both wall mounting and ceiling mounting are suitable for the
bullet camera. Wall mounting will be taken as an example in
this chapter. And you can take steps of wall mounting as a
reference for ceiling mounting.
Memory Card Installation
Steps:
1. Find memory card cover on device body.
16
Advertisement
Table of Contents
