Auvidea J130 Technical Reference Manual page 20

VERSION 1.0
Micro SD card (J15)
Micro SD card reader (Amphenol 101-00660-68-6). SDCARD_WP (F20) = 0 (inactive).
Pin Function
1 SD_DAT2
2 SD_DAT3
3 SD_CMD
4 3.3V
5 SD_CLK
6 GND
7 SD_DAT0
8 SD_DAT1
9 SD_CD
Buttons (J23)
6 pin connector with 1.25 mm pitch (on the bottom side next to the green LED).
Pin Function Jetson TX1
1 Vdd_RTC
2 power
3 sleep
4 force recv.
5 reset
6 GND
4x PCIe slot (J9)
This is a 4 lane PCIe 2.0 slot for PCIe cards. The PCIe card must be plugged so that the bracket is on the HDMI
connector side. We have tested various GbE LAN cards.
SATA (J8)
This is the SATA connector to interface to external SATA SSDs or hard drives (2.5" and 3.5").
AUVIDEA GMBH
J130 (38205-X)
Jetson TX1 Description
F19 SD card interface data 2
F18 SD card interface data 3
G19 SD card interface command
- enabled by SDCARD_PWR_EN = 1 (H16)
G18 SD card interface clock
- Ground
H18 SD card interface data 0
H17 SD card interface data 1
F17 GND
GPIO
A50 -
B50 GPIO3_PX.05
E2 GPIO3_PY.00
E1 GPIO3_PX.06
A47 -
- -
TECHNICAL REFERENCE MANUAL
Description
Realtime clock power input from backup battery or
super cap. Do not connect if super cap or Lithium cell
(J21) is populated on the J130.
power button (connect to GND)
sleep button (connect to GND)
force recovery button (connect to GND)
reset in button (connect to GND)
Ground
20