Learn Mode - Pretorian n-ABLER PRO Instructions Manual

Step 1
Orientate
-
your n-ABLER PRO
Begin with your n-ABLER
PRO unit in the intended
operating position (1,2,3
or 4 as shown in Figure 3).
Step 2
- Put your
n-ABLER PRO
into Learn Mode
Press the Speed Control
button at the rear of
the unit until you hear
a 'warbling beep' which
indicates your n-ABLER
PRO is in Learn Mode.
The LED flashes green.
Step 3
- Tell your
n-ABLER PRO
which way is up
Move the joystick in the direction you
want the cursor to move 'up' . There will be
no immediate cursor movement but when
your n-ABLER PRO has understood your
instruction it emits a single beep and the
cursor moves in the direction you want
Your n-ABLER PRO can be used in any of
the positions shown in Figure 3. The default
setting is with the computer lead farthest
from you. This, together with the option to
mount your n-ABLER PRO on a bracket, allows
it to be mounted in many different ways.
Step 4
Enable or Disable the Buzzer
-
If you want the buzzer on press the Left Mouse
Button once. If you want the buzzer off press
the Right Mouse Button.
Your n-ABLER PRO emits a single beep to
acknowledge your selection (irrespective of
whether the buzzer will be 'on' or 'off').
The buzzer gives you an audible indication as
you turn some of the features on and off. The
default setting is 'on' . If you like to work in a
quiet environment you may wish to turn the
buzzer off.
2
4
n-ABLER PRO
1
Step 5
Select which Button
-
is to be Left Click
If you would like the Left Mouse Button to be
Left Click, press it. Otherwise press the Right
Mouse Button.
Your n-ABLER PRO emits a 'warbling beep' to
indicate you are now leaving Learn Mode.
Your personal settings are stored in your
n-ABLER PRO's memory and will be retrieved
each time the computer is powered-up.
You can quit Learn Mode at any stage by
pressing the Speed Control Button until a
'warbling beep' is heard and the LED returns
to a steady green colour. Any new sttings you
made will not be saved.
If you make a mistake simply return to
Learn Mode by beginning at Step 1 and
repeat the procedure.
If you are left handed, or wish to use your
n-ABLER PRO 'upside-down' , you may wish to
swap the Left and Right buttons around.

Learn Mode

Figure 3
3