Installation - Pretorian n-ABLER PRO Instructions Manual

n-ABLER PRO
Compatibility
The n-ABLER PRO works with PS/2 and USB compatible computers. This includes the majority of
Personal Computers (PCs) and Apple Macintosh computers. PS/2 sockets are circular with 6 pins,
whereas USB connectors are rectangular with 4 pins.

Installation

Ensure your computer is fully turned-off and not just in sleep mode. Locate the relevant socket
(PS/2 or USB) on your computer and plug in your n-ABLER PRO. Make sure the connector is
correctly orientated. Do not force the connector into its socket as you may bend the pins.
If you are using the PS/2 socket on your computer you will need the adaptor plug supplied with
your n-ABLER PRO.
When you switch on the computer your n-ABLER PRO automatically configures itself to either
PS/2 or USB operation. Once you bootup the computer the n-ABLER PRO is ready to use. There are
no driver files to be loaded-the computer's resident drivers are used to help simplify installation.
Move the joystick briefly to ensure the cursor responds to movement.