Operating Instructions; Control Panel Functions - Venue tetra control Manual

OPERATING INSTRUCTIONS

Control Panel Buttons
The Control Panel includes several real-time controls, and allows the user to navigate the LCD Display
menu. For detailed functions, please see the table below.
FUNCTION
Settings Menu
(Hold Cycle +
Power On)
Factory Reset (Hold:
All On + Strobe +
Blackout + Power On)
Preset
Mood
Fade
www.venuelightingeffects.com
Fixture Type
RGB
RGBA
RGBW
RGBAW
RGBWA
RGBWUV
RGBCUV
CONTROL TYPE
Hold down the Cycle button while powering on the
unit to access the Settings Menu. Here, you can adjust
Combination
several global settings as outlined in the "Settings Menu"
section on page 11.
Hold down the All On, Strobe and Blackout buttons
Combination while powering on the unit to initiate factory reset and
revert to factory settings.
Turn the knob to select a preset in the currently
selected menu, and press/click the knob to confirm
Encoder/Switch
your selection. This knob works to select options in the
Setting Menu, Show Mode, and Strobe Mode.
Turn the knob to select a color preset in the currently
selected menu, and press/click the knob to confirm
Encoder/Switch
your selection. This knob works to select color presets in
Show Mode, All On Mode, and Strobe Mode.
Press this button to change between switching or fading
transitions. When the green backlight is illuminated,
Button colors will fade into the next step of each sequence.
When the backlight is off, colors will quickly switch from
one step to the next.
DMX Operating Mode
3-CH DMX
4-CH DMX
4-CH DMX
5-CH DMX
5-CH DMX
6-CH DMX
7-CH DMX
FUNCTION
9