Settings Menu - Venue tetra control Manual

Settings Menu

To access the settings menu, hold down the <CYCLE> button while powering on the controller.
Here, you can adjust several global settings including DMX Footprint, Backlight controls, and Cycle Rate.
Once inside the Settings Menu:
1. Turn the <PRESET> Encoder knob to scroll through the menu functions.
2. Turn the <MOOD> Encoder knob to find your desired setting within a particular function.
3. Press/Click the <MOOD> Encoder knob to confirm your selection.
For detailed functions within the settings menu, see the table below.
MENU FUNCTION
Footprint
Backlight
Cycle Rate
Cycle Opt
BO Fade
Exit
www.venuelightingeffects.com
SELECTION
RGB
Select the DMX profile of the Tetra Control. This setting
ensures that the Tetra Control will map correctly to nearly
RGBA
any type of DMX fixture. Refer to the user manual for your
lighting fixtures to determine which DMX profile they use
RGBW
(RGB, RGBA, and RGBW are most common), and set this
accordingly. If you are using multiple lights with different
RGBAW
DMX personalities, set the Footprint to RGB for most
accurate performance with multiple lighting types.
RGBWA
Enables dimmed backlights behind controls when settings
Enabled are inactive. This allows the user to see the full control panel
in low- visibility settings.
Disabled Disables backlights behind controls when settings are inactive.
Determines the frequency of program changes when
in Cycle Mode. The cycle rate is based on full sequence
completions of the currently selected program. For
example, if a cycle rate of 4 is chosen, each program
1-8
will complete it's full sequence 4 times before switching
to the next program. Here, the user may choose
between 1-8 sequence completions per program
change in Cycle Mode.
Enables random switching of both presets and moods
Pset&Mood
while Cycle Mode is active.
Enables random switching of only presets while Cycle
Pset Only Mode is active. The mood will remain the same, unless
manually altered.
Enables random switching of only moods while Cycle
Mood Only Mode is active. The preset will remain the same, unless
manually altered.
Enables faded blackout. This will cause all lights to fade to
Enabled
black when the Blackout button is pressed.
Disables faded blackout. This will cause all lights to instantly
Disabled
turn off when the Blackout button is pressed.
Select this menu option to exit the menu and return to your
most recently selected setting.
INSTRUCTIONS
11