All On Mode; Strobe Mode; Blackout - Venue tetra control Manual

All On Mode

All On Mode overrides any previously selected settings. Press the <ALL ON> button to activate this mode.
When activated, the yellow backlight will be illuminated, and all lights will be set to a single color or
color combination. Deactivating this mode by pressing <ALL ON> again will return the unit to your most
recently selected setting.
There are 25 color presets for All On Mode that are also shared by Strobe Mode. In order to change the
color or color combination:
1. Turn the <MOOD> Encoder knob until your desired color is flashing on the top line of the LCD display.
2. Press/Click the <Mood> Encoder knob to confirm your selection.
Additional controls in All On Mode:
• Adjust the overall brightness of the lights by turning the <DIMMER> Knob.

Strobe Mode

Strobe Mode overrides any previously selected settings. Press the <STROBE> button to activate this
mode. When activated, the yellow backlight will be illuminated, and all lights will be set to a single color or
color combination while producing a strobe effect. Deactivating this mode by pressing <STROBE> again
will return the unit to your most recently selected setting.
There are 3 different strobe presets available to choose from. In order to change the strobe sequence:
1. Turn the <PRESET> Encoder knob until your desired strobe effect (Strobe 1, Strobe 2, Strobe 3) is
flashing on the bottom line of the LCD display.
2. Press/Click the <PRESET> Encoder knob to confirm your selection.
There are 25 color presets for Strobe Mode that are also shared by All On Mode. In order to change the
color or color combination:
1. Turn the <MOOD> Encoder knob until your desired color is flashing on the top line of the LCD display.
2. Press/Click the <MOOD> Encoder knob to confirm your selection.
Additional controls in Strobe Mode:
• Adjust the speed of the strobe effect by turning the <STROBE SPEED> knob. This knob is designated
only for the strobe effect, and can be preemptively adjusted even when Strobe Mode is deactivated.
• Adjust the overall brightness of the lights by turning the <DIMMER> Knob.

Blackout

Blackout overrides any previously selected settings. Press the <BLACKOUT> button to activate. When
activated, the red backlight will be illuminated, and all lights will be instantly turned off (0%).
While Blackout is active, your most recent settings will remain on the LCD Display. The currently active
mode is still adjustable while lights are off, and any new settings selected will become visible once
Blackout is deactivated. Pressing the <BLACKOUT> button again will deactivate Blackout, and lights will
display your currently selected setting.
14
Venue Tetra Control Manual