Motorola MG8702 Quick Start Manual page 9

WiFi setup if you want to keep your
current network name and password
If your Motorola modem/router is replacing a modem/router
or router with WiFi capability, we strongly recommend that
you keep using the original WiFi network name (SSID) and
password that you were using on the modem/router or router
that you're replacing. This will allow all your WiFi devices to
keep working without a new WiFi setup. If possible, do this
configuration by connecting a computer with Ethernet to any
of your Motorola modem/router's Ethernet ports. You can also
do this configuration by using your smartphone or another
WiFi device that has a Web browser.
If you need to do this configuration by using your
smartphone or other WiFi device, first complete a WiFi
setup for your new modem/router, using the wireless
network name (SSID) and password printed on the
modem/router's bottom label. See the Quick Start Guide
for more details. (You don't need an Internet connection
to do this.)
1. First write down the wireless network name and
password for your original network. Most WiFi devices
work on either the 2.4 GHz band, or both the 2.4 GHz and
the 5 GHz band. You may a wireless network name and
password for just the 2.4 GHz band; or you may have a
wireless network name and password for both the 2.4
GHz and 5 GHz bands.
2. Now open the browser of the computer or WiFi device
that you're using to configure the Motorola
modem/router. Type http://192.168.0.1 in the address bar
and then press the Enter key. You will see a login screen