Advertisement
Technical specifications
General
System requirements:
Surround sound: PC sound card with 4-speaker 3D positional
sound capability, or PC-based or stand-alone surround
sound decoder.
Stereo sound: Two-channel sound card or any line-level stereo
input device.
Cables supplied: IEC mains cable, two 3.5 mm stereo jack to dual
RCA phono cables, and loudspeaker cables.
Approvals: CE marked. Compliant with the EMC and Low Voltage
Directives (89/336/EEC and 73/23/EEC).
Dimensions:
Satellites:
100 mm (W) x 136 mm (H) x 74 mm (D)
Subwoofer: 235 mm (W) x 420 mm (H) x 370 mm (D)
Amplifier:
204 mm (W) x 86 mm (H) x 340 mm (D)
Technical support: Technical hotline and World Wide Web site.
Warranty: Two years.
Loudspeakers
Subwoofer
MDF cabinet, containing magnetically shielded bass drive unit.
Low frequency drive unit: Audax 6.5" cone (35 Hz to 130 Hz).
Satellites
Mid-frequency (bass/mid) drive unit and separate high-frequency
drive unit (tweeter), both magnetically shielded.
Bass/mid frequency drive unit: Audax 3" cone.
High frequency drive unit: Audax 10 mm polymer dome.
Amplifier
Self Peak Instantaneous Temperature (°Ke) (SPiKe™) Protection
Circuitry for protection against overvoltage, undervoltage,
overloads, including shorts to the supplies, thermal runaway,
and instantaneous temperature peaks.
Power supply unit: Dual rail toroidal transformer with 28000 µF
of smoothing capacitance.
Power output: 80 watts RMS at 1% THD.
Frequency response: < 3 Hz to >100 kHz.
THD (nominal output): Less than 0.01% at 1 kHz.
Input sensitivity:
Inputs 1 & 3: 200 mVrms
Input 2:
1.5 Vrms
Controls: Power on/off, Volume, Subwoofer volume (relative to
main volume), Front/rear fade, Source switch, Quad switch for
stereo surround.
Connectors: Gold plated phono inputs for surround source, stereo
source, and Dolby Digital LFE channel; 3.5 mm jack for second
stereo source; individual outputs to each speaker unit; 3.5 mm
headphone jack on amplifier front panel; IEC mains inlet.
Internal power supply: 220-240V AC 50 Hz.
Advertisement
