Advertisement
Note for UK users
When replacing the fuse in the supplied moulded mains plug,
always refit the integral fuse holder/cover. Always fit a 3 amp fuse
either in the plug or adapter, or at the distribution board.
If the supplied mains plug is not suitable for your mains socket,
remove its fuse and cut the plug off the lead. Destroy the severed
plug immediately to avoid the potential shock hazard if this were
plugged into a mains socket.
FOR FURTHER SAFETY INSTRUCTIONS, REFER TO THE SAFETY
SECTION AT THE END OF THIS USER GUIDE.
Copyright
Copyright 1999 by VideoLogic Limited. All rights reserved. No part of this publication may be copied or
distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or
computer language, in any form or by any means, electronic, mechanical, magnetic, manual or otherwise,
or disclosed to third parties without the express written permission of VideoLogic Limited.
Disclaimer
VideoLogic Limited makes no representation or warranties with respect to the content of this document and
specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Further, VideoLogic Limited reserves the right to revise this publication and to make changes in it from time
to time without obligation of VideoLogic Limited to notify any person or organization of such revisions or
changes.
Trademarks
VideoLogic, Sirocco, Sirocco Crossfire, and the VideoLogic logo are trademarks or registered trademarks of
VideoLogic Limited. All other product names are trademarks of their respective companies.
Credits
This manual was written by Brendan Cooper and illustrated by Nick Noble. It is a product of VideoLogic
Limited, Home Park Estate, Kings Langley, Hertfordshire WD4 8LZ, United Kingdom.
First Edition
June 1999
11A58
Advertisement
