Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VideoLogic Manuals
  4. Speaker System
  5. Sirocco Crossfire
  6. Manual

VideoLogic SIROCCO CROSSFIRE Manual

3d speaker system
Hide thumbs Also See for SIROCCO CROSSFIRE:

Advertisement

Quick Links

Download this manual

Advertisement

loading

Related Manuals for VideoLogic SIROCCO CROSSFIRE

Summary of Contents for VideoLogic SIROCCO CROSSFIRE

  • Page 2 Further, VideoLogic Limited reserves the right to revise this publication and to make changes in it from time to time without obligation of VideoLogic Limited to notify any person or organization of such revisions or changes.
  • Page 3 So follow the safety instructions on the facing page and at the end of this user guide, connect and set Sirocco Crossfire up, and get caught in the crossfire of the ultimate 3D speaker system.
  • Page 4 Connecting Speakers to amplifier Connect the speakers and subwoofer as shown below. Use the longer, 8 metre cables for the rear satellites, and the shorter, 2 metre cables for the front speakers and the subwoofer. On all speakers, connect the all-black cables to the black (-) terminals, and the cables with the white stripe to the red (+) terminals. The subwoofer connects to the Sub terminal.
  • Page 5 Source to amplifier You can connect up to three sources to Sirocco Crossfire: one full 3D positional or surround sound source, and two stereo sources. 3D or surround sound Source 1 is the 3D sound source. This could be a PC with a 4- channel audio card for 3D positional sound, such as VideoLogic’s...
  • Page 6 Surround sound If you want to use Sirocco Crossfire with a surround sound decoder, such as VideoLogic’s DigiTheatre Decoder, position the speakers according to the documentation included with the decoder.

  • Page 7: Using The Amplifier

    Sirocco Crossfire. stereo speakers. Source 3 is connected via the socket at the front of the amplifier. Use this for any line- level device that uses a 3.5mm...

  • Page 8: Troubleshooting

    If the satellites swap too, that is, the dead satellite becomes live and the live satellite goes dead, the problem is with the If you have connected Sirocco Crossfire to a PC sound card, make audio source or the cables, so make sure the source is working sure the Windows volume control isn’t set to mute, by double-...

  • Page 9: Technical Specifications

    Technical specifications General Amplifier System requirements: Self Peak Instantaneous Temperature (°Ke) (SPiKe™) Protection Circuitry for protection against overvoltage, undervoltage, Surround sound: PC sound card with 4-speaker 3D positional overloads, including shorts to the supplies, thermal runaway, sound capability, or PC-based or stand-alone surround and instantaneous temperature peaks.

  • Page 10: Safety Instructions

    Do not use Sirocco Crossfire for sustained periods at high volume with an input signal above line level Brug ikke Sirocco Crossfire med høj lydstyrke i længere perioder med et indgangssignal, der ligger over (i.e.
  • Page 11 Evitare di utilizzare l’unità per lunghi periodi ad un livello alto di volume. A causa della bassa Desligue o cabo de alimentação da tomada da parede se o Sirocco Crossfire não vai ser utilizado por capacità di distorsione di Sirocco Crossfire, l’ascolto potrà avvenire a livelli di volume superiori al um período de tempo prolongado.
  • Page 12 Please return your registration card to your nearest VideoLogic centre. USA, Canada and Latin America VideoLogic Service Center 69080 Corte Santa Fe, San Diego, CA 92121, USA +1 888 336 1197 sales_usa@videologic.com +1 888 336 1198 sales support_usa@videologic.com +1 888 618 3579 support &...