Curling Your Hair - Silvercrest SHC 240 B2 Operating Instructions Manual

Curling your hair

Once you have made all settings on the appliance and the Temperature display
is permanently lit up (temperature reached):
1) Always use the hair template
hair from getting caught in the curling chamber
Make sure that the hair strand is only as thick as the punched hole in the hair
template
2) When placing the hair strand into the curling chamber
be facing towards the head. Hold the appliance around 5 cm from your
scalp. The strand of hair must be inserted straight and taut. To prevent the
hair from getting entangled, make sure that the hair strand is completely in
the curling chamber
3) Let go of the hair strand and press and hold the Start button
The roller
4) As soon as the set number of turns has been reached, the roller
the appliance beeps. You can now stop pressing the Start button
The set time starts counting down. As soon as the time has elapsed, you will
hear 3 beeps.
NOTE
► If a strand of hair gets caught in the curl chamber
you will hear 3 beeps and "Er2" appears on the display. Press the Release
button
device. Then press the On/Off button
again to continue curling.
│ GB │ IE
■ 24
to separate the hair strands and prevent the
.
.
✓
5 cm
starts turning and winding up the strand of hair.
to release the mechanism and pull the hair strand out of the
.
, the opening must
.
, the roller
and make the desired settings
SHC 240 B2
stops and
.
stops,