Table of Contents
Advertisement
Defining service properties
6
Click OK.
Adding outgoing service properties
From Policy Manager:
1
In the Services Arena, double-click the service. Click the Outgoing tab.
The Properties dialog box displays the Outgoing properties tab.
2
Use the Outgoing Connections Are drop list to select Enabled and Allowed.
3
To define specific users and hosts on the Trusted network that can send packets
out through the service, click Add beneath the From list.
The Add Address dialog box appears. For a description, see "Adding addresses to service
properties" on page 50.
4
To define specific allowed external destinations for traffic through this service,
click Add beneath the To list.
5
To customize logging and notification for outgoing traffic for this service, click
Logging. Configure logging and notification according to your security policy
preferences.
For a description, see "Customizing logging and notification by service or option" on page 76.
Click OK.
6
Adding addresses to service properties
Both the Incoming and Outgoing properties include From and To lists of addresses.
Use the Add Address dialog box to add a network, IP address, or specific user to the
From or To list. From the service's Properties dialog box:
1
Click Add.
2
To add a member that has already been defined, click your selection on the
Members list. Click Add.
The member appears in the Selected Members and Addresses list.
3
To add a new entry, click Add Other.
4
Use the Choose Type drop list to select the member type.
5
In the Value text box, enter the member IP address or name.
6
Click OK.
The member appears in the Selected Members and Addresses list.
7
To view a list of users associated with a host on the Members list, select the
member and then click Show Users.
Working with wg_ icons
Service icons beginning with "wg_" are created automatically when you enable
features such as PPTP and authentication. These icons appear only in the Advanced
view of Policy Manager, in the Services Arena. The "wg_" service icons rarely require
modification. WatchGuard recommends leaving "wg_" icons in their default settings.
50
Advertisement
Table of Contents
