Configuring Shared Servers For Ruvpn; Adding Remote Access Users - Watchguard Firebox FireboxTM System 4.6 User Manual

Watchguard firebox system user guide
Hide thumbs Also See for Firebox FireboxTM System 4.6:
Table of Contents

Advertisement

Configuring shared servers for RUVPN

• The IP addresses of the DNS and WINS servers in the trusted network that
perform IP address lookup on host alias names.
• The usernames and passwords of those authorized to connect to the Firebox
using RUVPN.
• For Mobile User VPN, you will also need:
- Mobile User VPN license key
- Target Firebox upgraded to strong or medium encryption
Configuring shared servers for RUVPN
RUVPN clients rely on shared Windows Internet Name Server (WINS) and Domain
Name System (DNS) server addresses. For information on configuring these servers,
see "Entering WINS and DNS server addresses" on page 40.

Adding remote access users

The Firebox configuration file automatically includes two Firebox User groups called
pptp_users and ipsec_users. When a remote host connects and creates a tunnel,
Policy Manager authenticates the username against the list of members for the group
associated with the tunnel type. In other words, an incoming PPTP tunnel would
authenticate against the pptp_users group.
Once authenticated, the Policy Manager then adds the remote client IP address to the
group. Use the Firebox User group to configure services for incoming and outgoing
RUVPN traffic.
Because of the way Windows holds the username and password for subsequent
logins, one option to reduce end-user confusion is to assign the same RUVPN login
and password as those used for Windows NT login and password. This method,
however, is less secure than using multiple passwords.
RUVPN users must be added as Firebox users even if another authentication
method is used internally.
Adding a member to built-in RUVPN user groups
The process to add a member to the built-in RUVPN user groups is the same for both
PPTP and IPSec. The example below is for pptp_users. From Policy Manager:
1
Select Setup => Authentication.
2
Click the Firebox Users tab. To add a new user, click the Add button beneath the
Users list.
There is also a button to access the Setup Firebox User dialog box from within the Mobile User
VPN wizard.
134

Advertisement

Table of Contents
loading

Related Products for Watchguard Firebox FireboxTM System 4.6

Table of Contents