Table of Contents
Advertisement
Resetting Firebox passphrases
Saving a configuration to the local hard disk
From Policy Manager in the Advanced view:
1
Select File
The Save dialog box appears.
2
Enter the name of the file.
The default is to save the file to the WatchGuard directory.
3
Click Save.
The configuration file is saved to the local hard disk.
Saving a configuration to the Firebox
From Policy Manager in the Advanced view:
1
Select File
2
Use the Firebox drop list to select a Firebox.
3
Enter the configuration (read-write) passphrase. Click OK.
The configuration file is saved first to the local hard disk and then to the primary area of the
Firebox flash disk. You are prompted to restart the Firebox. The new Firebox configuration will
not be enabled until the Firebox is restarted.
4
If you entered the IP address of a different Firebox, you are asked to confirm your
choice. Click Yes.
Resetting Firebox passphrases
WatchGuard recommends that for optimum security you periodically change the
Firebox passphrases. To do this, you must have the current configuration passphrase.
From Policy Manager:
1
Open the configuration file running on the Firebox.
For more information, see "Opening a configuration from the Firebox" on page 23.
2
Select File
3
Use the Firebox drop list to select a Firebox. Enter the configuration passphrase.
Click
.
OK
4
Enable the Save To Firebox checkbox. Select Save Configuration File and New
Flash Image. Click Continue.
5
Enter the new monitoring (read-only) and configuration (read-write) passphrases.
Click
.
OK
The new image, including the new passphrases, is saved to the Firebox, and the Firebox
automatically restarts.
Make certain that your monitoring and configuration passphrases are different from one
another.
Tips for creating secure passphrases
Although an attacker could crack any passphrase eventually, you can toughen your
passphrases using the following tips:
24
Save
As File.
=>
=>
Save
To Firebox.
=>
=>
Save
To Firebox.
=>
=>
Advertisement
Table of Contents
