Displaying And Hiding Fields - Watchguard Firebox FireboxTM System 4.6 User Manual

Watchguard firebox system user guide
Hide thumbs Also See for Firebox FireboxTM System 4.6:
Table of Contents

Advertisement

Displaying and hiding fields

Use the Preferences dialog box to show or hide columns displayed in LogViewer.
From LogViewer:
Select View => Preferences. Click the Filter Data tab.
1
2
Enable the checkboxes of the fields you would like to display. Disable the
checkboxes of those columns you would like to hide.
To hide columns, point the mouse at the right edge of the column heading in the main window
and click and drag the edge to the left until the column disappears.
LogViewer displays log entries across several columns. Log entries sent to the
WatchGuard log have a time stamp, host name, process name, and the process ID
before the log summary. The following describes each column and its default status:
Number
The sequence number in the file. Default = Hide
Date
The date the record entered the log file. Default = Show
Time
The time the record entered the log file. Default = Show
The rest of the columns vary according to the type of event displayed. The events of
most frequency and interest, however, are packet events, which would display data
as shown below:
deny in eth0 339 udp 20 128 192.168.49.40 255.255.255.255 67 68
(bootpc)
The packet event fields are described here in order, from left to right.
Disposition
Default = Show. The disposition can be allow, deny, or log, as follows:
- Allow – Packet was permitted by the current set of filter rules.
- Deny – Packet was dropped by the current set of filter rules.
- Log – The eventual disposition of the current packet was unknown when
the output was generated.
Direction
Determines whether the packet was logged when it was received by the
interface ("in") or when it was about to be transmitted by the Firebox ("out").
Default = Hide
Interface
The name of the network interface associated with the packet.
Default = Show
Total packet length
The total length of the packet in octets. Default = Hide
Protocol
Protocol name, or a number from 0 to 255. Default = Show
VPN Manager Guide
Displaying and hiding fields
105

Advertisement

Table of Contents
loading

Related Products for Watchguard Firebox FireboxTM System 4.6

Table of Contents