GE Peristaltic Pump P-1 Operating Instructions Manual page 43

Position
The pump can be used in a vertical or horizontal position and can be connected to lab-
oratory scaffolding by fitting the support rod to the rear panel.
Electrical power
Connect the power cord to a grounded power outlet as specified in
quirements, on page
Peristaltic Pump P-1 Operating Instructions 28962201 AF
CAUTION
If the product is connected to laboratory scaffolding, make sure
that the laboratory scaffolding is stable.
36.
4 Installation
4.5 Connections
Section 4.1 Site re-
43