2 Safety instructions
2.3 Emergency procedures
2.3
Emergency procedures
Introduction
This section describes how to shut down Peristaltic Pump P-1 in an emergency situation.
The section also describes the result in the event of power failure.
Emergency shutdown
In an emergency situation, follow the steps below to stop the run:
Step
1
2
Result: The run is interrupted immediately.
Power failure
The following table describes the consequences of a power failure.
Power failure to...
Peristaltic Pump P-1
26
Action
Press the run/stop switch to the stop position.
If required, disconnect the mains power cord.
will result in...
•
The run is interrupted immediately
Peristaltic Pump P-1 Operating Instructions 28962201 AF