Table of Contents
Advertisement
•
Turn the speed control to selected speeds: 0 (off) and 1 (slow), 2 (me-
dium), 3 (fast)
•
Set the tilt angle by adjusting the fan head accordingly.
•
You can tighten/loosen the screw on the neck of the fan to lock the tilt
angle
•
Never touch the blades with hands or any object. Keep long hair away
from the fan blades
•
There is an oscillation control on top of the fan motor. Press down to
make the fan sweep left and right. Lift up to stop the oscillation motion.
•
Adjust the height. Take the weight of the fan head assembly, loosen
the Height Adjust Knob, set the desired height, then tighten the Height
Adjust Knob again.
Your fan requires little maintenance and contains no user serviceable parts.
Do not attempt to dismantle the unit yourself. The fan is permanently lubri-
cated and will not require additional lubrication.
Cleaning:
•
Always unplug the fan from the mains outlet before cleaning.
•
The fan can be cleaned with a soft dry cloth. Deposits of dust can be re-
moved by using a vacuum cleaner, ensuring that the air vents and grilles
remain free from dust to prevent overheating.
•
Important: Do not allow water to run into the interior of the fan, as this
can cause an electric shock.
•
Do not use abrasive cleaners or chemical agents to clean the product.
•
When not in use, store the fan in it's retail box.
Description: RETRO 16" (40cm) STAND FAN
Model: SFA12610 (all colours)
Input Voltage: 230V 50Hz 50 Watts
6
SFA12610_IM.indd 6
HOW TO USE
CLEANING & MAINTENANCE
TECHNICAL DATA
10/11/2017 11:47
Advertisement
Table of Contents
