Battery Placement; Cleaning And Maintenance - Swann Activair SFA23010 Manual

16” (42cm) stand fan
Table of Contents

Advertisement

1.
Remove the battery holder by pressing the lock-
ing tab A with your thumb and pulling it out as
per arrow B.
2.
Replace the battery with the same type and the
(+) side facing up.
3.
Gently push in the holder until securely locked
into place.
CAUTION: Danger of short circuit and electric shock if
battery is incorrectly replaced. Replace batteries only
with batteries of the same type or compatible
Your fan requires little maintenance and contains no user serviceable parts.
Do not attempt to dismantle the unit yourself. The fan is permanently lubri-
cated and will not require additional lubrication.
Cleaning:
Always unplug the fan from the mains outlet before cleaning.
The fan can be cleaned with a soft dry cloth. Deposits of dust can be re-
moved by using a vacuum cleaner, ensuring that the air vents and grilles
remain free from dust to prevent overheating.
Important: Do not allow water to run into the interior of the fan, as this
can cause an electric shock.
Do not use abrasive cleaners or chemical agents to clean the product.
When not in use, store the fan in it's retail box.
SFA23010_IM.indd 9

BATTERY PLACEMENT

CLEANING & MAINTENANCE
9
25/03/2020 11:28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Activair silence sfa23010n5055322541576

Table of Contents