Connecting The Receiver To The Network - Elmo Cast Instruction Manual

◆Connecting the receiver to the network

1. Establish a WiFi connection between your device and the dongle.
2. Access the Settings screen (Home menu) and select the "Network Management" menu. (⇒P.19)
3. Select "Connect via 5G router" to display the "Add network" screen.
Click the Refresh button on the top right to display a list of available access points.
4. Select the connection destination and enter the password.
※
If you want to connect to an access point not displayed in the list, select "Add network" and enter the SSID
manually.
5. When the connection is successfully established, an icon [
screen, indicating that the dongle is connected to the network via a router.
■Connecting to the receiver via WiFi router
1. Connect your device to the network to which the dongle is connected.
2. Start the browser on your device and enter the Infrastructure IP address displayed at the bottom left of the Home
screen in the address field to access the Settings screen of the dongle.
] will be displayed on the top right of the Home
20