➌ Advanced Operations; Configuring Settings Of The Receiver - Elmo Cast Instruction Manual

➌
Advanced operations

◆Configuring settings of the receiver

Connect your device to the receiver via WiFi.
Start the browser on your device and enter the IP address (default value: http://192.168.168.1) of the receiver in the
address field to access the Settings screen.
When you access for the first time, the selection screen for the country in which this receiver is used will be displayed.
Select the country from the list and click the button at the bottom to restart. After restarting, the WiFi settings of the
selected country will be applied.
Caution
Choosing an inappropriate country may violate the laws and regulations of each country.
Be sure to select the country correctly.
Caution
Depending on the device or browser you are using, the setting menu may remain in English.
In that case, select the language you want to use from "Device management" → "Language".
14