Switching Between Connected Devices - Elmo Cast Instruction Manual

●When using Chrome OS
1. Turn on the Wi-Fi setting of your device and select the SSID of the dongle. Then connect the device to the dongle via
Wi-Fi.
2. Enter the IP address of the dongle in the Chrome browser and log in as an administrator.
3. Enter the network management menu and connect the dongle to the network.
4. Open the Chrome browser on your device.
5. Tap the Other icon [
6. Select "ELMO Cast" from a list of connectable devices.
Perform Chromecast (mirroring) from your device.
※No matter which OS is used, you need to connect to the network when Miracasting from the Chrome browser.
※For details of the Wi-Fi connection and mirroring operations, refer to the instruction manual of the respective devices.
◆Switching devices to be mirrored
●When performing Miracast streaming
Disconnect the Miracast connection of the device currently used first and start Miracasting of the next device.
● When mirroring via Airplay or Google Cast
By default, if mirroring is started from other device while mirroring is in progress, the screen images of both devices will
be displayed simultaneously (up to 4 splits) in one screen.
If you want to switch devices without displaying the images in one screen, disconnect the Miracast connection of the
device currently mirrored first and start mirroring of the next device.
Alternatively, change the setting of the Host control menu in the Administrator settings as follows:
「Automatically accept host key」 → 「ON」
「Screen share」 → 「OFF」
] on the top right and tap [Cast].
13