19.08.2008 12:58
Card/USB mode
CARD/USB function
Press the FUNCTION button and select the CARD
or USB function.
Insert the USB stick or the SD/MMC card in the slot
provided on the rear of the player.
Press the PLAY/PAUSE
on the remote control to start playback.
You can also call up a display of the tracks on the USB stick or on the SD/MMC card.
Follow the steps on page 20 under "Search using FIND function" (MP3 only).
Playing CDs
Audio CDs
You can use this device to play audio CDs (incl. CD-Rs, CD-RWs and MP3 CDs).
Inserting and removing discs
Press the FUNCTION button on the player or on the remote control and select the
CD mode which then appears in the display.
Open the CD compartment by pressing OPEN/CLOSE on the player. The CD
compartment opens upwards.
Insert a CD into the compartment with the label side up.
Close the CD compartment by pressing
OPEN/CLOSE again or by pressing the PLAY button on the remote control.
The CD starts to rotate and CD READ appears in the display.
When the CD finishes it is in stop mode (display shows total number of tracks and
total runtime).
The display reads NO DISC if there is no disc inserted or if the disc cannot be read.
Do not open the CD compartment while the disc is playing or rotating. Press STOP
first.
To remove a CD take it by the edges and carefully press down the holder in the middle.
18
button on the player or
English