Grounding Instructions - Waring PRO WCT800R Operating Manual

Grounding Instructions

For your protection, Waring Pro ™ Toasters are equipped with a
3-conductor cordset that has a molded 3-prong grounding-type
plug, and should be used in combination with a properly connected
grounding-type outlet as shown in Figure A. If a grounding-type out-
let is not available, an adapter, shown in Figure B, may be obtained
so that a 2-slot wall outlet can be used with a 3-prong plug. As
shown in Figure C, the adapter must be grounded by attaching its
grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the
outlet cover plate screw is properly grounded. If in doubt, consult a
licensed electrician. Never use an adapter unless you are sure cover
plate screw is properly grounded.
Note: Use of an adapter is not permitted in Canada.