Handle Control Lever Adjustment; Clutch Control Lever Adjustment - Montgomery Ward GIL-39012B Owner's Manual

HANDLE CONTROL LEVER ADJUSTMENT
The hondle control odjustmenl (Figure 7) hos been
set for proper operotion ond should not need to be
odiusfed. Should the hondle control lever (Figure 7)
become loose ofter mony hours of operolion, tighlen
the odjustmenl nul only enough lo eliminote ony ex-
cess movement in the hondle confrol lever.
CAUTION: Do nol overtighlen odjuslmenf nut. This
moy result in foilure of hondle bor lotch system lo
fully engoge ond hold hondle in desired position.
CLUTCH CONTROL LEVER ADJUSTMENT
The clutch control lever is pre-set for neutrol shitt
position. An odjustmenf meons is provided, how-
ever, lo center the clulch control lever in lhe slot on
the hondle shroud should it become necessory due
to weor. This odiustmenl is locoted ot fhe hondle
pivol point (Figure 8)
TO ADJUST:
1. Ploce hondle bor in litling locotion ond odjusl
hondle bor to lowesf posifion.
2. Loosen the odiustment nut (Figure 8).
3. Move lhe clutch control lever on the hondle bor
unfil cenfered in lhe neutrol oreo (Figure 9).
4. Retighten fhe odjustmenl nut (Figure 8).
ADJUSTMENT NUT
CLUTCH LEVER CONTROL
NEUTRAL AREA