Page 1
COMBINATION REFRIGERATOR-FREEZER WITH ALLERGY-FREE ZONE Model: AZRF7W User Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS FELIX STORCH, INC. An ISO 9001:2015 registered company 770 Garrison Avenue Bronx, NY 10474 www.accucold.com...
TABLE OF CONTENTS Important Safeguards Location of Parts Technical Information Installation Instructions 7-10 Before Using your Appliance Installing your Appliance Electrical Connection Reversing the Door Swing of the Lower Unit (FF71ES) 9-10 Operating your Appliance Care and Maintenance 11-12 Troubleshooting Limited Warranty...
IMPORTANT SAFEGUARDS Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others.
Page 4
• In the event of any damage: Avoid open flames and anything that creates a spark, Disconnect from the electrical power line, Air the room in which the appliance is located for several minutes, and Contact the Service Department for advice. •...
LOCATION OF PARTS FFAR23L (Upper Refrigerator) Item Part Name Shelf Adjustable foot Door Hinge This unit has a lock located on the front of the door FF71ES (Lower Refrigerator-Freezer)
TECHNICAL INFORMATION FFAR23L (Upper Refrigerator) Model FFAR23L Capacity 1.7 cubic feet Electrical Input 115V AC / 60Hz Rated Current 1.0A Refrigerant R600a, 0.57oz Installation Free-standing Unit Weight 35.2 lbs. 18.9” W x 17.7” D x 20.6” H Unit Dimensions NOTE: This unit is designed to be used as an allergy-free zone. It features a lock and two keys for safe and secure storage.
If not, check the electrical supply. If the cause of trouble cannot be located, contact your Summit dealer. 1. Set the Temperature Control Knob to the OFF position and then plug the AC cord into an...
2. Set the Temperature Control Knob at the MAX position and let the unit operate for 20 minutes. The freezer compartment should get slightly frosted, and the motor should run smoothly with a soft hum. 3. Rotate the Temperature Control Knob counterclockwise toward the MIN position. Before the pointer of the knob reaches the MIN position, the motor should turn off.
Reversing the Door Swing of the Lower Unit (FF71ES) The doors of the FF71ES refrigerator-freezer can be hinged on either side so that the door swing can be suited to the location of the installation. Tools Required: • Standard screwdriver •...
Page 10
5. Tilt the refrigerator back or lay it on its back for steps 6, 7 and 8. Use a pad or blanket to protect the floor and to avoid scratching the painted finish. 6. Remove the leveling legs by turning them counterclockwise. Remove the lower hexagonal-head screws, two on the hinge side and one near the front corner of the other side.
OPERATING YOUR APPLIANCE Temperature Control • The appliance temperature can be regulated by adjusting the Temperature Control Knob. The closer to the MAX position the control knob is set by rotating it clockwise, the lower the refrigerator temperature becomes. • Refrigerator temperature will vary depending on the quantity of food stored and on the frequency with which the door is opened.
Page 12
Vacations • Short vacations: Leave the appliance operating during vacations of less than three weeks. • Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the doors open slightly, blocking them open if necessary.
The appliance is not level. The gasket is dirty or bent. If your appliance shows other symptoms than those described above, or if you have checked all items listed as the cause and the problem still exists, then call SUMMIT® Customer Service at 1-800-932-4267.
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory- specified parts and repair labor to correct defects in materials or workmanship.