Fisher-Price HANDY MANNY TOT ROD R2510 Assembly And Owner's Manual page 9

Lock Nut
End of Steering
Column
Steering Linkage
5
• Fit the end of the steering column through the hole in the
steering linkage.
• Fit a lock nut onto the end of the steering column.
• Tighten the lock nut with the assembly tool.
Steering Column Cover
6
• Place the steering column cover over the lock nut and push to
"snap" it into the steering linkage.
• Turn the vehicle upright.
T3260pr-0920
ASSEMBLY
Steering Wheel
Wire with Connector
Turn Signal
7
• Position the turn signal with the hollow side down.
• Fit the wire with connector on the end of the steering wheel
through the center of the turn signal.
• Fit the turn signal onto the steering wheel.
Motor Harness
Connector
8
• Plug the motor harness connector from the vehicle into the
steering wheel connector.
Steering
Column
9
• While carefully feeding the wire down into the dash, fit the steering
wheel onto the end of the steering column.
Steering Wheel
Connector
DASH VIEW
9