Fisher-Price HANDY MANNY TOT ROD R2510 Assembly And Owner's Manual page 8

2
• Locate the wire connector inside the front end of the vehicle.
• While feeding the wire connector through the hole in the dash,
fit the tabs on the dash onto the front end of the vehicle.
8
Dash
Wire Connector
SIDE VIEW
ASSEMBLY
3
DASH VIEW
• Insert two #8 x ¾ " screws
straight into the dash, as
shown. Tighten the screws.
Hint: If the screw holes in the dash do not align with the vehicle,
place a finger in the steering wheel opening in the dash. Pull the
dash toward the back of the vehicle to reposition it.
Steering Column
4
• Turn the vehicle over.
• Remove the protective caps from the ends of the steering
column and throw them away.
• Fit the straight end of the steering column down through the
hole in the dash.
BOTTOM VIEW
Pull
T3260pr-0920