Fisher-Price HANDY MANNY TOT ROD R2510 Assembly And Owner's Manual page 10

End of Steering Column
10
• Fit the remaining lock nut onto the end of the steering column.
• Tighten the lock nut with the assembly tool.
11
• "Snap" the steering wheel cap into the center of the
steering wheel.
10
ASSEMBLY
Folded Tab
Lock Nut
Folded End
12
• Position both seat belts so that the fasteners face each other,
as shown.
• Fit the folded end of each short seat belt down through the
outer slots in the seat. Do not insert the folded tab into the
slot. Pull up on each seat belt to make sure it is secure.
Steering
Wheel Cap
13
• First, "snap" the front of the seat to the vehicle
• Next, "snap" the four tabs near the back of the seat into the
matching slots in the vehicle
Seat Belt
Fasteners
Folded Tab
Folded End
A
SIDE VIEW
.
A
.
B
T3260pr-0920
B