Birlea KENSINGTON S000059 Assembly Instructions

4’6 bed

Vendor: S000059

ASSEMBLY INSTRUCTIONS

KENSINGTON 4'6 BED

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR

USE YOUR KENSINGTON 4'6 BED FRAME

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

HEALTH & SAFETY:

DO NOT jump on this bed frame

DO NOT use this bed frame if any parts are missing, damaged or worn

DO NOT use this bed frame unless all fixings are secured

Always use on a level, even surface

WARNING: If this bed is placed on a laminated floor you must place some protection under all legs

to stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame

collapses

CARE & MAINTENANCE:

Periodically check all screws & fixings to ensure they are secure

DO NOT push the bed frame as this will damage the legs

Always lift the bed with two people to reposition

Keep any sharp objects away from the frame

www.birlea.com

Page 1 of 3

Table of Contents

Need help?

Do you have a question about the KENSINGTON S000059 and is the answer not in the manual?

Page 1 Periodically check all screws & fixings to ensure they are secure DO NOT push the bed frame as this will damage the legs Always lift the bed with two people to reposition Keep any sharp objects away from the frame www.birlea.com Page 1 of 3...
Page 2 Vendor: S000059 Parts List Hardware List Part Description Part Description Headend M6 x 25 mm JCBC Screw Side Rail M6 x 40 mm JCBC Screw Footend M4 Allen Key Centre Rail M5 Allen Key Slat Double Slat Cap Single Slat Cap Centre Leg Step 1: Insert the legs (6) to the headend (1) and footend (3) and twist to secure DO NOT use any power tools as this may damage the frame and will invalidate any claim...
Page 3 Step 4: Fix the slats (5) to the side rails (2) using hardware parts E and F DO NOT use any power tools as this may damage the frame and will invalidate any claim For complete product information, images and dimension diagrams please visit www.birlea.com Page 3 of 3...