Getting Started - Unitech EA630 User Manual

1.4 Getting Started

1.4.1 Remove / Install the Battery Cover
1. Unlock the battery cover
by turning the knobs a quarter of
a turn (90°).
Lift the battery cover up to 45
degrees (45°), then gently pull the
cover off.
2. And pull the battery up to remove it.
3. Lock the battery cover by
turning the knobs a quarter of
a turn (90°). Make sure the battery
cover is securely closed, or you
may be unable to turn on the
terminal.
WARNING! There is a risk of fire and burns if the battery is handled improperly. DO NOT
disassemble, crush, puncture, short external contacts, or dispose the battery
pack in fire or water. DO NOT attempt to open or service the battery. Dispose of
used batteries according to local recycling guidelines in your area.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
EA630 User's Manual
9
© 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.