Table of Contents
Advertisement
(2) Once the group has been selected, the unit with the smallest address number will be displayed if
registered units exist for that particular group. The unit type will also be displayed after two seconds.
Details displayed:
Temperature setting display area: Address number
Room temperature display area: Unit type
Example:
When groups 1 and 2 are not registered and an indoor unit with the address 005 is
registered in group 3.
Temperature setting display area: [
CENTRALLY CONTROLLED
CHECK
ADDRESS
ON
˚C
COLLECTIVE
GROUP
Press
CENTRALLY CONTROLLED
CHECK
ADDRESS
ON
˚C
COLLECTIVE
GROUP
Press
CENTRALLY CONTROLLED
CHECK
ADDRESS
ON
˚C
COLLECTIVE
GROUP
˚C
OFF
GROUP
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
once.
˚C
OFF
GROUP
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
once.
˚C
OFF
GROUP
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
] will be displayed if nothing is registered.
The relevant group number is displayed, and [
displayed two seconds later if nothing is registered.
Group 1 display
[
] will be displayed two seconds
later if nothing is registered.
Group 2 selection
[
] or other unit type will be
displayed two seconds later.
Group 3 selection.
Indoor unit 005 is registered.
] will be
15
Advertisement
Table of Contents
